Steel hardware

Segment pulls - Install pulls onto draws & doors by drilling a 5.5mm dia screw hole through the panel. The supplied screw suits a 15 to 20mm thick draw front / door and are installed with a 3mm allen key. Please let us know if you have a draw / cupboard front that's outside these dimensions and we can supply a suitable length screw.

U handle large.jpg

Brass hardware

Wood - Drill a 2.5mm ø pilot hole. Install using the supplied brass screw.

Masonry - Install using a 5mm ø white masonry wall plug to the manufacturers instructions. Install using the supplied brass screw.

Plasterboard - Install using a Ramset spring toggle (50mm long with 1/8 inch ø thread) to the manufacturers instructions.